Netgear router is one of the great devices that boost the range of your existing WiFi network. The router can easily connect to your modem and let you access the internet in every corner of your house. Netgear router comes with an Ethernet port (depending upon the device model you are using), allowing you to connect 2-3 wired devices. However, a lot of users complaint that the Ethernet port on their Netgear router is not working. If you are also sailing on the same boat, then we have a rescue plan for you. Here, in this piece of writing, we will provide you some easy yet effective troubleshooting tips to get rid of “Ethernet port not working on Netgear router” issue in minutes. Let’s take the plunge!

Resolved: Netgear Router Ethernet Port Not Working

  1. Power Cycle Your Netgear Router

The first and basic fix to make the Ethernet port on your Netgear device working is to power cycle your router. Follow the step-by-step instructions below to power cycle your Netgear router:

  • Unplug your Netgear router from the wall socket and turn it off.
  • Disconnect all the devices that are connected to your Netgear router.
  • Wait for a few minutes.
  • Power up your Netgear router.
  • Connect your WiFi-enabled devices to the Netgear router.
  • Try to access Netgear router login page to check whether the Ethernet port is working or not.
  1. Check the LEDs on Your Netgear Router

Check the LEDs on your Netgear router. The Ethernet LED must be green and stable. On the off chance if it is blinking or off, try to re-established the wired connection between your Netgear router and modem.

  1. Check the Cable Connections

The next troubleshooting tip to get rid of the Ethernet port not working issue is to check the cable connections of your Netgear router. The wired connection should be accurate and finger-tight. Furthermore, check the Ethernet cable you are using. It should be well-maintained and free from any type of cuts and damages. In the event that you find any kind of damage in the Ethernet cable, replace it right away.

  1. Update the Router’s Firmware

An outdated firmware version on your Netgear router may result in non-working of the Ethernet port issue. So, check the firmware version on your Netgear router. If it is outdated, visit the official site of Netgear and follow the on-screen instructions.

  1. Reset Your Netgear Router

If you are still baffling with the same issue, then the only way to get rid of it is to perform the Netgear router reset process.

Before you reset Netgear router, it is important for you to be aware of the fact that the Netgear router reset will erase all the personalized information and data on your Netgear router including username and password. So, it is recommended to take the backup of all the customized settings of your Netgear router prior to resetting.

To reset your Netgear router, do the following:

  • Turn on your Netgear router.
  • Disconnect your currently connected modem/ router, PC, laptop or mobile device from your Netgear router.
  • Locate the Netgear router reset hole and push it using a pin or a paper clip.
  • Hold the router reset hole for a couple of seconds and release it.
  • Thus, your Netgear router resets successfully.

Wrapping Up

That’s all! So, these were some of the best yet effective fixes to resolve “Ethernet port not working on Netgear router” issue. Just in case, if you are still struggling with the same issue, feel free to get in touch with our finest technical experts.

Bonus Tip: To revamp your WiFi experience, add a Netgear WiFi range extender to Netgear router. Just perform Netgear extender setup and see the difference.


Please enter your comment!
Please enter your name here