If you are facing issues while staying connected to the internet after resetting Netgear extender, don’t fret. You are not alone in the battle! Nearly 90 percent of Netgear extender users are facing this type of issue. Fortunately, this issue can be fixed easily by using a few troubleshooting tips.

In this piece of writing, we have mentioned some useful tips that can help you get rid of the internet-connectivity issues after resetting Netgear extender in minutes. Let’s take the plunge!

Fix: Can’t Connect to Internet after Resetting Netgear Extender

Is Your Internet Connection On?

Yes, you read it right! This is a simple mistake that can happen by anyone accidentally. You or someone in your home might have disabled the WiFi access to your Netgear extender showing no internet connection. So, to fix WiFi-connectivity issue after resetting Netgear extender, make sure that your internet is on.

Bonus Tip: To boost your internet range and speed up to 30 percent, it is suggested to place your Netgear extender and existing router in close proximity.

Reboot Your Devices

You might blame your router for internet-connectivity issues but any device can be the culprit. So, to give your devices a fresh start, reboot them once.

To power cycle or reboot your Netgear extender, router, PC, laptop, or mobile devices, do the following:

  • First and foremost, disconnect your devices from each other.
  • Unplug or power off your devices and wait patiently for at least 15 minutes.
  • Power on your devices.
  • Connect your router to the Netgear extender.

Check your internet connection by accessing the extender login page using mywifiext.

Check the Wired Connections

Loose or improper wired connections can also let you experience internet-connectivity issues. Thus, to fix the issue, make sure that your Netgear extender and router are properly connected. Also, ensure that your devices are receiving a steady and uninterrupted power supply. Apart from that, to avoid any kind of issues, make use of a non-dusty and non-damaged Ethernet cable. If you find any cuts on the Ethernet cable, replace it right away or connect your Netgear extender and router in a wireless manner.

Check the Location

On the off chance if your Netgear extender is placed in a non-ventilated area in your home, then also you may face internet-connectivity issues. So, ensure to place your Netgear extender in a location, where you can receive its WiFi signals on your connected devices to the fullest without signal drop. Apart from that, it is also suggested to place your Netgear extender away from the reach of neighboring WiFi networks.

Bonus Tip: The center-most location in your home would be the best place for your Netgear extender. Once you’re done with the placement process, try to log in to your Netgear extender using IP.

Set up Your Netgear Extender Properly

If you haven’t set up your Netgear extender properly or left the configurtaion process incomplete, then bear in mind that you will not be able to make the most out of your internet connection. Thus, to get the most out of your internet connection, make sure to configure your Netgear extender in a proper manner.

Navigate to the Netgear Genie setup wizard using mywifiext.net for on-screen setup instructions.

Just in case, you facemywifiext.net not working issue, use the default Netgear extender IP address to access the Netgear Genie setup wizard.

Still Facing the Same Issue?

If you still can’t make the most out of your internet connection even after following the tips provided in this post, don’t feel depressed. Simply drop your queries in the comments section and rest leave everything to us.

Leave a Reply